20 Door Handle Replacement Websites That Are Taking The Internet By Storm
Door Handle Replacement
It's worth replacing door handles if you aren't happy with the way they appear, or if they are difficult to use. Installing a new door handle is simple if you have patience.
Modern door handles are typically equipped with cover plates which hide the screws for an attractive look. If the new handle doesn't have them already connected, you'll need to attach them separately.
Remove the handle that was previously used
Door handles aren't just an important for their aesthetic value to your home, but they're also vital for safety since they let you lock and unlock your door. However, over time, your door handle may lose its grip, appear loose or start to look old and worn. This is an indication that it's time for a replacement.
If your door handle is becoming difficult to use, it might be time to replace it. This is a serious issue because you won't be capable of locking or unlocking the door, which could put you and your family at risk.
Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle can be dangerous, especially for elderly and children members who might struggle to open it. They could become trapped. It's simple to replace a damaged handle on doors.
Modern door handles are typically standard sizes and will fit any door. If you're not sure whether the new door handle you're buying will fit, try taking out the old one and measuring the holes in its housing. This will help you to purchase the right size door handle.
The easiest way to take off the door handle you have been using is to unscrew it from the door. Usually you'll need a screwdriver. However some door handles have the cover plate which hides the screws that mount them, so you'll have to cut off this to access the screws beneath. Once you have removed the old handle, make note of the way the spindle is connected to ensure that you can align it when you fit the new one.
You can also remove the door handle by uncrewing it from the latch mechanism. You can use a screwdriver for removing the door handle. However, you will have to locate the tiny latch, which is located on the edge trim piece. After taking off the latch, remove the handle and the strike plate. Then, you can remove the latch from the edge of the door.
Removing the Strike Plate
You'll need to replace the latch plate when replacing the handle. It's the part that holds the hole where the door's latch hooks in when the door closes. The box that the new handles come in will include two different latch plates - either a rectangular or circular (see the diagram above detailing door handle parts). If your current latch plate is rectangular, swap it to a round one, so that the latch is able to hook into the strike plate in a way that makes the handle more comfortable to use.
The first step is to unhook the screw holding the latch plate. These screws are often tight and will require some force to loosen. If you are able, it could be beneficial to have a second person assist with this part.
The latch plate should come out of the door after the screws have been removed. If it is stuck or doesn't move then use a small nail file to scratch around the edges of the latch plate. This can help loosen the plate.
Now you can move on to creating the new door strike plate for installation. Install the latch plate in the door jamb using the screws that came with your new handles. Be cautious not to tighten too much the screws, as this could cause damage to the strike plate.
If you are not sure whether the latch plate is in the correct position, shut and open the door to check whether it latches and closes properly. If not then you'll have to adjust the strike plate up or down, or even forward or back until the door closes and latches properly.
If the door still moves or jiggles, then you may have to expand your latch hole on the strike plate. This is more prevalent with older doors, but could also be caused by wear and tear, hinge mortises that are not deep enough or not the right size for the latch, or due to a broken or damaged strike plate that is damaged or broken. If this is the situation, follow the same procedure as adjusting the strike plate, using the use of a metal file instead a chisel and hammer.
Removal of the Latch
The latch is the angled metal piece that moves in and out of the hole on the inside edge of your door. When you turn the handle, it pushes the latch forward and allows you to open the door. Repair My Windows And Doors connects to an opening in the frame of the door to keep the door closed. If your door wobbles when you close it, replacing the latch could be all that is needed to fix the problem.
The screws that hold the door latch are difficult to see however, you can insert a screwdriver into a small hole in the trim plate and pry the latch off. After removal of the trim plate you should be able to take off the latch and the bolts that hold it in place and the spindle in position.
If the latch is not easily removed then use a paperclip tool to remove it from the handle mechanism. Insert the item in the recessed slot of the latch, and gently twist it or jiggle until the that the latch and handle begin to break off. You may have to repeat this procedure several times before you can remove the latch.
Once the old latch is removed it should be possible to insert the new latch into the slot without any issues. Use the new screws to secure the latch to the strike plate or door frame. Make sure it's correctly placed in the slot, aligned with the screw chambers.
Before installing the new handle, make certain to measure your existing backset (the distance from the centre of the big hole on the front surface of the door to the edge). Also, make sure that the latch size on the new handle matches the measurement of your existing handle.
If you are replacing the latch or handle or handle, or if your previous lock cylinder is damaged then you'll need an entirely new one. If you're not replacing the locks, the new latch will fit in your existing recess, and be compatible with your current keys. Pick a latch that has rectangular cover plates to match the handles you have.
Remove the cover plate
You can replace your door handles with a new design of roses and levers to make a difference in the appearance of your home. You can buy complete sets that include escutcheons, privacy adaptors and escutcheons.
The first step in replacing an internal door handle is to remove the cover plate or rose, which hides the screws and mechanism inside. Utilize a flathead to take off the plate. It may have an opening on one edge or be held in place by pins.
When the cover plate is removed take off the screw that holds the interior handle in place and set it aside. Remove the screws that secure both the outer and inner plates. You can loosen them by using the help of a Philips Screwdriver. Remove the plates that hold the inner plate and latch from the door. Place them aside.
Some doors don't have this gap. If it doesn't have a handle, you'll need to make a hole in the door for the new handle. The procedure to do this is the same as for opening a door with a lock, but you'll have to be extra careful to avoid damaging the frame or door.
After drilling the holes after which you'll have to put in new screws for the door knob. Purchase the same size as the old screws to avoid getting the handle too tight or loose. Installing a new latch and strike rod is also required. These aren't included in all door handle sets.
If you're in search of a reliable replacement for your interior door handle set Try the Amazon's Choice FAERSI two-piece chrome-finished handle set. It's a factory-fit and has received a plethora of five-star reviews from delighted customers. It's a great option to replace damaged or worn door handle hardware in the interior of your Chevy HHR.